Your Complete Guide to BricklayingNov 02, 2023
Are you looking to build a brick wall for your home?
Look no further than the "Standard Specification and Work Procedure for Brickwork in Masonry Construction."
This guide is your comprehensive resource for all aspects of brickwork, including brick quality, mortar, soaking, laying, curing, scaffolding, and more. To get started, make sure you have the necessary tools, including a trowel, hammer, bolster, spirit level, shovel, wheelbarrow, bricks, string and clamps (or nails), and a dry bristle brush.
For brickwork materials, it is important to choose bricks that meet specified requirements for quality, with straight edges and a consistent form. The mortar should also meet standard standards and must be of the prescribed grade. Not to forget that soaking of bricks is vital and they should stay submerged in clean water for 12 hours before being used. When preparing the foundation, make sure you double-check measurements and ensure the trench is sturdy enough to support the wall.
To lay the bricks, each course must be absolutely horizontal and the walls must be perfectly plumb. Vertical joints on a sequential course should not cross over one another directly, although vertical joints on an alternate course should. The brickwork needs to be kept wet for at least 20 days following installation and must be shielded from the effects of the sun, rain, frost, etc. as it remains green and prone to damage.
Whether you are a DIY enthusiast or a contractor, the "Standard Specification and Work Procedure for Brickwork in Masonry Construction" is an essential resource for ensuring quality brickwork. With clear instructions and detailed guidance, this guide is the key to successful brickwork in substructures and superstructures. Find us at your service with experts to assist you in your work to avoid unforeseen circumstances.